The CHL100SS is a stunning, 100cm chimney cooker hood in stainless steel with a simplistic design and a powerful extraction rate. This hood is perfect to place above range cookers or any large hob to help you keep your kitchen clean and fresh. With 3 speed settings to choose from and LED down lights you can be sure this hood will be up to any task!
This cooker hood is suitable for either internal re-circulation – air is passed through a charcoal filter, purified and released back into the kitchen, or external extraction – cooking odours and vapours are transferred outside with the help of a ducting kit. Please see below for the appropriate accessories.
This product boasts a 5 Year Parts & 2 Year Labour Guarantee* to give you the reassurance you need when buying a new appliance.
Features
3 variable speeds
Push button controls
2 x 1W LED lights
Single fan motor
Ducted or re-circulated installation
3 x dishwasher safe aluminium grease filters
2 x telescopic chimney sections
Optional Accessories
SIA2 re-circulation charcoal filters available from our store
D5 & D7 external ducting kits available from our store
Fitting Notes
Please ensure there is enough ceiling height to accommodate the clearance needed between the appliance and the hob.
Required height over gas hob (mm): 750
Required height over electric hob (mm): 650
Please note that if the hob manual states the clearance must be greater than the above, this will override these instructions.
Technical Specification
Ducting outlet diameter (mm): 150
Extraction rate (m3/hr): 400
Noise level (dBa): 66
Fuse rating (A): 3
Product dimensions (mm): W1000 x D490 x H590-760
Height of chimney sections (mm): 330 + 330
Net / gross weight (kg): 12.5 / 15.0
Power (W): 27
Mains lead length (m): 1
Please note that there is no plug supplied with this product.
*Guarantee subject to registration within 30 days of purchase.
