Angled cooker hoods are the perfect choice for those with little headroom. The sloped design and shallower depth mean they do not protrude from the wall as much as other cooker hoods.

The AGTE61 is part of our 60cm angled glass touch control cooker hood range, which is in a sleek black design so as to fit in seamlessly with your kitchen décor scheme. Select the 1w LED lamps to shed the perfect
lighting over your cooking area or the 3w LED edge lighting, which comes in red, blue and green, to create an ambient glow in your kitchen! Coupled with this, the 4-layered aluminium grease filter keeps your appliance in pristine condition with every use, by preventing the accumulation of unwanted grease in your cooker hood and  the choice to alternate between 3 extraction powers, you can eliminate steam from your kitchen
in no time!

This cooker hood comes with the SIA D3 125mm x 3m ducting kit, so you have everything you need to set it up for external extraction. The ducting kit is used to channel odours, steam and smoke straight outside, keeping your kitchen clean and fresh. The appliance can be used for internal re-circulation however carbon filter(s) would need to be purchased separately.

This product boasts a 5 Year Parts & 2 Year Labour Guarantee* to give you the reassurance you need when buying a new appliance.

Features

Ducted or recirculating installation
3 speeds
4 Layer aluminium grease filter
Single motor
Touch control design
Dishwasher proof grease filters
2 x 1w LED Lamp
1 x 3w LED edge lighting (Separate button for edge lighting)
Operating Modes: Extraction & re-circulation
Telescopic chimney sections
The ‘timer’ mode keeps the fan running for fifteen minutes before powering off

Accessories

D3 Ducting kit included with this product for external extraction

Fitting Notes

Please ensure there is enough ceiling height to accommodate the clearance needed between
the appliance and the hob. Required height over gas & electric hob: 550mm (please note that if
the hob manual states the clearance must be greater than 550mm, this will override these instructions)

Technical Specification

Noise level: 66 dBA
Extraction rate: 550 m3/hr (max)
Rated electrical voltage: 230-240V
Dimensions (WxDxH): 600mm x 303mm x 780mm-1080mm
Air outlet diameter: 125mm
Height of chimney sections: 400mm+330mm
Mains lead length: 1m

Please note that there is no plug supplied with this product.
*Guarantee subject to registration within 30 days of purchase.