The SIA SSG702SS-CGH70SS package consists of a stainless steel, 70cm 5 burner gas hob and curved glass cooker hood. The hob is designed with cutting-edge features to ensure safety, convenience and flexibility, so you can take your culinary creations to new heights. The cooker hood has a sleek curved glass design, with performance that is sure not to disappoint. SIA is our in-house range of kitchen appliances that provides high quality at an affordable cost.
The hob features a flame failure safety device (FFD), which stops the flow of gas when a flame goes out, preventing gas leaks. The LPG conversion kit is a set of small brass jets that allow you to convert the hob to use bottled butane or propane, if you do not have access to a natural gas connection.
The cooker hood is suitable for either internal re-circulation – air is passed through a charcoal filter, purified and released back into the kitchen, or external extraction – cooking odours and vapours are transferred outside with the help of a ducting kit. Please see below for the appropriate accessories.
These products come with a 5 Year Parts & 2 Year Labour Guarantee* to give you the reassurance you need when buying a new appliance.
SIA SSG702SS 70cm 5 Burner Gas Hob In Stainless Steel With Enamel Pan Stands
Features
Front dial controls
Enamel pan stands and burner caps
Flame failure safety device
LPG conversion kit included
Automatic ignition
Burners
Front left burner – semi-rapid (kW): 1.75
Rear left burner – semi-rapid (kW): 1.75
Front right burner – auxiliary (kW): 1.0
Rear right burner – rapid (kW): 3.0
Middle centre burner – triple wok (kW): 3.8
Technical Specifications
Nominal power (kW): 11.3
Fuse rating (A): 3
Product dimensions (mm): W680 x D500 x H90
Cut-out dimensions (mm): W557 x D477
Net / gross weight (kg): 8.0 / 9.5
Mains lead length (m): 1 (UK standard plug supplied)
Gas inlet: ½ inch male threaded connection
Please note this appliance must be installed by a Gas Safe engineer.
SIA CGH70SS 70cm Curved Glass Cooker Hood Extractor Fan in Stainless Steel
Features
3 variable speeds
Push button controls
1 x 1W LED light
Single fan motor
Ducted or re-circulated installation
1 x dishwasher safe aluminium grease filter
2 x telescopic chimney sections
Optional Accessories
SIA2 re-circulation charcoal filters available from our store
D5 & D7 external ducting kits available from our store
Fitting Notes
Please ensure there is enough ceiling height to accommodate the clearance needed between the appliance and the hob.
Required height over gas hob: 750mm
Technical Specifications
Ducting outlet diameter (mm): 150
Extraction rate (m3/hr): 400
Noise level (dBa): 65
Fuse rating (A): 3
Product dimensions (mm): W700 x D450 x H430-800
Height of chimney sections (mm): 400 + 400
Net / gross weight (kg): 9.0 / 11.5
Power (W): 26
Mains lead length (m): 1
Please note that there is no plug supplied with this product.
*Guarantee subject to registration within 30 days of purchase.
