The SSG701SS-CG61SS package comprises of a stylish, 70cm 5 burner gas hob and a modern curved glass 60cm cooker hood, both in a contemporary brushed stainless steel finish. These appliances have been chosen as they complement each others design and will fit in with any kitchens décor.
The SSG701SS gas hob features a flame failure safety device (FFD), which stops the flow of gas when a flame goes out, preventing gas leaks. The LPG conversion kit is a set of small brass jets that allow you to convert the hob to use bottled butane or propane, if you do not have access to a natural gas connection.
The CG61SS cooker hood is suitable for either internal re-circulation – air is passed through a charcoal filter, purified and released back into the kitchen, or external extraction – cooking odours and vapours are transferred outside with the help of a ducting kit. Please see below for the appropriate accessories.
These products come with a 5 Years Parts & 2 Years Labour Guarantee* to give you the reassurance you need when buying a new appliance.
SIA SSG701SS 70cm Stainless Steel 5 Burner Gas Hob with Cast Iron Pan Stands
Front dial controls
Heavy-duty cast iron pan stands and enamel burner caps
Flame failure safety device
LPG conversion kit included
Front left burner – Semi-rapid (kW): 1.75
Rear left burner – Semi-rapid (kW): 1.75
Front right burner – Auxiliary (kW): 1.00
Rear right burner – Rapid (kW): 3.00
Middle burner – Triple Flame Wok Burner (kW): 3.80
Nominal power (kW): 11.30
Fuse rating (A): 3
Product dimensions (mm): W680 x D500 x H90
Cut-out dimensions (mm): W557 x D477
Net / gross weight (kg): 11.5 / 13.0
Mains lead length (m): 1 (UK standard plug supplied)
Gas inlet: ½ inch male threaded connection
Please note this appliance must be installed by a Gas Safe engineer.
SIA CG61SS 60cm Stainless Steel Curved Glass Chimney Cooker Hood Extractor Fan
3 variable speeds
Push button controls
1 x 1W LED light
Single fan motor
Ducted or re-circulating installation
1 x dishwasher safe aluminium grease filter
2 x telescopic chimney sections
SIA2 re-circulation charcoal filters available from our store
D5 & D7 external ducting kits available from our store
Please ensure there is enough ceiling height to accommodate the clearance needed between the appliance and the hob.
Required height over gas hob (mm): 750
Required height over electric hob (mm): 650
Please note that if the hob manual states the clearance must be greater than the above, this will override these instructions.
Ducting outlet diameter (mm): 150
Extraction rate (m3/hr): 400
Noise level (dBa): 67
Fuse rating (A): 3
Product dimensions (mm): W600 x D450 x H430-800
Height of chimney sections (mm): 400 + 400
Net / gross weight (kg): 8.0 / 10.0
Power (W): 26
Mains lead length (m): 1
Please note that there is no plug supplied with this product.
*Guarantee subject to registration within 30 days of purchase.