The SSG601SS-CH61SS package comprises of a stylish, 60cm 4 burner gas hob and a traditional 60cm chimney cooker hood, both in a contemporary brushed stainless steel finish. These appliances have been chosen as they complement each others design and will fit in with any kitchens décor.
The SSG601SS gas hob features a flame failure safety device (FFD), which stops the flow of gas when a flame goes out, preventing gas leaks. The LPG conversion kit is a set of small brass jets that allow you to convert the hob to use bottled butane or propane, if you do not have access to a natural gas connection.
The CH61SS cooker hood is suitable for either internal re-circulation – air is passed through a charcoal filter, purified and released back into the kitchen, or external extraction – cooking odours and vapours are transferred outside with the help of a ducting kit. Please see below for the appropriate accessories.
These products come with a 5 Years Parts & 2 Years Labour Guarantee* to give you the reassurance you need when buying a new appliance.
SIA SSG601SS 60cm Stainless Steel 4 Burner Gas Hob with Cast Iron Pan Stands
Front dial controls
Heavy-duty cast iron pan stands and enamel burner caps
Flame failure safety device
LPG conversion kit included
Front left burner – Semi-rapid (kW): 1.75
Rear left burner – Semi-rapid (kW): 1.75
Front right burner – Auxiliary (kW): 1.00
Rear right burner – Wok burner (kW): 3.50
Nominal power (kW): 8.00
Fuse rating (A): 3
Product dimensions (mm): W580 x D500 x H90
Cut-out dimensions (mm): W557 x D477
Net / gross weight (kg): 8.0 / 9.5
Mains lead length (m): 1 (UK standard plug supplied)
Gas inlet: ½ inch male threaded connection
Please note this appliance must be installed by a Gas Safe engineer.
SIA CH61SS 60cm Stainless Steel Chimney Cooker Hood Kitchen Extractor Fan
3 variable speeds
Push button controls
2 x 28W halogen lights
Twin fan motor
Ducted or re-circulating installation
2 x dishwasher safe aluminium grease filters
2 x telescopic chimney sections
SIA1 re-circulation filters available to buy from our store
D1 & D3 external ducting kits available to buy from our store
Please ensure there is enough ceiling height to accommodate the clearance needed between the appliance and the hob.
Required height over gas hob (mm): 750
Ducting outlet diameter (mm): 125
Extraction rate (m3/hr): 550
Noise level (dBa): 67
Fuse rating (A): 3
Product dimensions (mm): W600 x D450 x H675-935
Height of chimney sections (mm): 400 + 400
Net / gross weight (kg): 6.9 / 8.8
Power (W): 176
Mains lead length (m): 1
Please note that there is no plug supplied with this product.
*Guarantee subject to registration within 30 days of purchase.