The MEH901SS 90cm chimney extractor in stainless steel has a contemporary design which allows it to be a main focal point in any kitchen. It has 3 speeds with push button control and a twin fan motor and a built in LED light for good illumination.
This cooker hood is suitable for either internal re-circulation – air is passed through a charcoal filter, purified and released back into the kitchen, or external extraction – cooking odours and vapours are transferred outside with the help of a ducting kit. Please see below for the appropriate accessories.
As a Matrix appliance you get a fantastic 2 Years Parts & 1 Year Labour Guarantee* so you can be sure the appliance will last for years to come.
3 variable speeds
Push button controls
1 x LED lamp
Twin fan motor
Ducted or re-circulated installation
3 x dishwasher safe aluminium grease filters
2 x telescopic chimney sections
CDA CHA17 re-circulation charcoal filters available from our store
CDA AED51, AED53 & AED54 external ducting kits available from our store
Please ensure there is enough ceiling height to accommodate the clearance needed between the appliance and the hob.
Minimum required height over gas hob (mm): 600
Minimum required height over electric hob (mm): 700
Please note that if the hob manual states the clearance must be greater than the above, this will override these instructions.
Ducting outlet diameter (mm): 120/125
Extraction rate (m3/hr): 372
Noise level (dBa): 70
Fuse rating (A): 3
Product dimensions (mm): W900 x D490 x H686-800
Please note that there is no plug supplied with this product.
*Guarantee subject to registration within 30 days of purchase.