The SSG602SS-STH60SS pack provides you with a great hob and hood combination for a new kitchen renovation. The gas hob comes with enamel supports which are removable for easy cleaning, ensuring it will look great for years to come. The traditional visor hood will help you keep your kitchen clean by removing grease from cooking vapours, whilst the handy LED downlight will ensure perfect illumination of the hob . SIA is our in-house brand that provides high quality un-branded products to suit any budget.
The gas hob features a flame failure safety device (FFD), which stops the flow of gas when a flame goes out, preventing gas leaks. The LPG conversion kit is a set of small brass jets that allow you to convert the hob to use bottled butane or propane, if you do not have access to a natural gas connection.
The cooker hood is suitable for either internal re-circulation – air is passed through a charcoal filter, purified and released back into the kitchen, or external extraction – cooking odours and vapours are transferred outside with the help of a ducting kit. Please see below for the appropriate accessories.
These products come with a 5 Years Parts & 2 Years Labour Guarantee* to give you the reassurance you need when buying a new appliance.
SIA SSG602SS 60cm Stainless Steel 4 Burner Gas Hob with Enamel Pan Stands
Front dial controls
Enamel pan stands and burner caps
Flame failure safety device
LPG conversion kit included
Front left burner – auxiliary (kW): 1.00
Rear left burner – semi-rapid (kW): 1.75
Front right burner – semi-rapid (kW): 1.75
Rear right burner – rapid (kW): 3.00
Nominal power (kW): 7.50
Fuse rating (A): 3
Product dimensions (mm): W580 x D500
Cut-out dimensions (mm): W557 x D477
Net / gross weight (kg): 6.5 / 8.0
Mains lead length (m): 1 (UK standard plug supplied)
Gas inlet: ½ inch male threaded connection
Please note this appliance must be installed by a gas safe engineer.
SIA STH60SS 60cm Stainless Steel Slimline Visor Cooker Hood Kitchen Extractor
3 variable speeds
Push button controls
1 x 4W LED light
Single fan motor
Ducted or re-circulated installation
CO6 re-circulation charcoal filters available from our store
D1 & D3 external ducting kits available from our store
Please ensure there is enough ceiling height to accommodate the clearance needed between the appliance and the hob.
Required height over gas hob (mm): 750
Ducting outlet diameter (mm): 125
Extraction rate (m3/hr): 250
Noise level (dBa): 65
Fuse rating (A): 3
Product dimensions (mm): W600 x D470 x H100
Net / gross weight (kg): 4.8 / 5.6
Power (W): 68
Mains lead length (m): 1
Please note that there is no plug supplied with this product.
*Guarantee subject to registration within 30 days of purchase.